Seat alhambra Owner's Manual page 207

Vehicles may also have:
– Tool box*
– Wheel bolt spanner
– Wire hook* for wheel trims
– Open jaw spanner 10 x 13
– Screwdriver with box spanner in handle for the wheel bolts. The
screwdriver blade is reversible.
– Jack
Before the jack is placed back into the tool box, the claw must be
fully wound back. The crank is then tensioned against the side of
the jack.
Some light alloy wheels have the caps on the wheel screws. A
special wire hook is provided with the tool box to remove them.
Place the hook in the orifice on the cap and pull to remove
K
fig. 168.
Safety First
⇒
Controls and equipment
Stowage of tow bracket*
Tips and Maintenance
If and when
AL0-131
Fig. 169
AL0-132
Fig. 170
Technical Data
203