Specifications - Allen-Bradley 1769-PA2 Installation Instructions Manual

Specifications

Technical Specifications
Attribute 1769-PA2
Input voltage range 85...265V AC
Input frequency range 47...63 Hz
Power supply distance 8
(1)
rating
8 I/O modules can be connected on either side of the power supply for a maximum of 16 modules
Operating altitude 2000 m (6562 ft)
Isolation voltage 265V (continuous),
Reinforced Insulation Type
Routine tested at
2596V DC for 1s, AC Power
Input to System and AC
Power Input to 24V DC
User Power
Power consumption 100VA @ 120V AC
130VA @ 240V AC
Power dissipation 8 W @ 60 °C (140 °F)
Current capacity @ 5V DC 2.0 A
Current capacity @ 24V DC 0.8 A
Inrush current, max 25 A @ 132V AC
Fuse type Littelfuse 02153.15MXP
Dimensions (HxWxD), 118 x 70 x 87 mm (4.65 x 2.76 x 3.43 in.)
approx
height including mounting tabs is 138 mm (5.43 in.)
Weight, approx 485 g (1.07 lb)
(2)
Wiring category 1 on power ports
Wire size 2.5 mm
North American temp T3C
code
IEC temp code N/A
Enclosure type rating None (open-style)
(1) You can use a maximum of two banks of I/O modules. This condition occurs when configuring your system with a MicroLogix 1500 controller, one
expansion cable, one expansion power supply, and a total of eight I/O modules. The expansion power supply cannot be directly connected to the
MicroLogix 1500 controller.
(2) Use this Conductor Category information for to plan conductor routing. See the Industrial Automation Wiring and Grounding Guidelines,
publication 1770-4.1.
Rockwell Automation Publication 1769-IN028C-EN-P - August 2016
1769-PB2
19.2...31.2V DC
N/A
75V (continuous),
Reinforced Insulation Type
Routine tested at
1697V DC for 1s, DC Power
Input to System
50VA @ 24V DC
7.5 W @ 60 °C (140 °F)
2.0 A
0.8 A
30 A @ 31.2V DC
Littelfuse 021706.3MXP
2 on power ports
2
(14 AWG) solid copper wire rated at 90 °C (194 °F), or greater, 1.2 mm (3/64 in.) insulation max
T4
Compact I/O Expansion Power Supplies
1769-PA4 1769-PB4
85...132V AC or 19.2...32V DC
170...265V AC, switch
selectable
47...63 Hz N/A
265V (continuous), 75V (continuous),
Reinforced Insulation Type Reinforced Insulation Type
(IEC Class 1 grounding (IEC Class 1 grounding
required) required)
Routine tested at Routine tested at
2596V DC for 1s, AC Power 1697V DC for 1s, DC Power
Input to System Input to System
200VA @ 120V AC 100VA @ 24V DC
240VA @ 240V AC
18 W @ 60 °C (140 °F) 14.5 W @ 60 °C (140 °F)
4.0 A 4.0 A
2.0 A 2.0 A
25 A @ 132V AC 30 A @ 31.2V DC
Wickmann Wickmann 19193-6.3A
19195-3.15A Littelfuse 021706.3MXP
Littelfuse 02183.15MXP
630 g (1.39 lb)
1 on power ports 2 on power ports
N/A T4
31