Source Selection - SPL Director User Manual

• Learn mode ends automatically after the second button is learned.
• Please note: direct insolation of strong light (e.g. sun light, halogen lamps, neon tubes, fluorescent tubes,
terrarium and aquarium lights as well as big flat screens) may lead to misoperation of the remote control
functions.

Source Selection

Source seletion of the Director can be remotely controlled using any infrared (IR) remote control.
The special feature is that the Director learns your remote and not the other way round. You do not need a universal
remote control, take, for example, the remote control of the CD player. Out of the many buttons there are maybe two you
hardly use if at all and that do not directly trigger a function on the CD player. Assign previous source / next source to
these two buttons and let the Director learn them.
• Press the PGM IR SOURCE button (12)
Power LED now lights up brighter.
• Point your remote control towards the
the previous source. The power LED flashes once per push. Press the same button repeatedly until
the power LED flashes three times within a short interval – programming this button is then com-
pleted.
15
on the rear of the unit until you note the actuation point.
IR receiver (3) and push the button you wish to use to switch to
C A U T I O N
RISK OF ELECTRIC SHOCK
D O N O T O P E N
I F R B
Operation
IR IR
PGM PGM
Refer to
Manual
AT T E N T I O N
~115 V AC/~230 V
RISQUE DE CHOC ÉLECTRIQUE
Fuses: 230 V: T 50
N E P A S O U V R I R
AM