Abbreviated Dialing - AT&T DEFINITY Communications System Generic 1 User Manual

Abbreviated Dialing

To program or reprogram
an outside number,
extension, or feature code
into a personal list
To place a call using a
personal, group, system,
or enhanced list
1
On a separate sheet of paper, jot down the outside
numbers, extensions, and/or feature codes you want
to program as items on your personal list(s)
Note: Each telephone number or feature code is
stored as a separate list item.
2 Pick up handset
3
Dial Abbreviated Dialing Program code
4 Dial personal list number (1, 2, or 3)
5 Dial list item (1, 2, 3...)
6 Dial number you want to program (up to 24 digits)
Note: If you are programming an outside number,
be sure to include a trunk code, if applicable.
7 Press [ # ]
Number is stored
Repeat Steps 5-7 if you want to program
additional items on the same list; hang up and
begin again at Step 1 if you want to program
items on another personal list
Hang up to end programming
8
Note: Keep your own personal lists in the
Abbreviated Dialing table provided in the back of
this booklet; group, system, and enhanced lists are
available from your system manager.
1
Dial appropriate Abbreviated Dialing List code:
List 1
List 2
List 3
2 Dial desired list item (1, 2, 3...)
Stored number is automatically dialed
[dial tone]
[dial tone]
[dial tone]
[confirmation tone]
[dial tone]
13