ABB IRB 260 Product Manual page 233

xx0600002657
A
B
C
D
E
G
M
Mounting tool, bearing race, tilthouse shaft
The tool for fitting a bearing race to the tilthouse shaft is assembled with the parts
shown in the following figure (included in the toolkit for service).
3HAC026048-001 Revision: E
Hydraulic cylinder, 3HAC11731-1
Press washer, 3HAC023963-007
Hex socket head cap screw, 9ADA183-25, 2 pcs, M6 x 25
Connection rod, M16, length= 400 mm
Nut, 3HAC5507-1
Nut, 3HAC023963-028
Sleeve, 3HAC023963-037
Note
The parts cannot be ordered separately, but are included in the complete toolkit!
The article numbers are only given for identification.
© Copyright 2006-2013 ABB. All rights reserved.
7 Reference information
7.7 Special tools
Continued
Continues on next page
233