How To Use The Control Panel; Examples Of Scrolling Information - IVT GreenlineC Manual To Installation, Commissioning And Maintenance

How to use the control panel

With three buttons and a knob you can navigate to the various displays for settings and readings. The
last line at the bottom of the display contains information about the functions of the buttons in the
current display. If you choose Heat or Info the display you have chosen to stay in will always remain.
With the knob
you navigate up
and down be-
tween the dis-
plays or change
the settings.
Press "Heat" once and
you come to the shortcut
for heat settings. You can
choose to stay in which
display you want.

Examples of scrolling information

STANDBY
No rad heat required
No hotwater required
HOT WATER MODE
Heat pump only
Stop temp
Present temp
HEAT RAD MODE
Compr. + Add. heat
Stop temp
Present temp
HEAT RAD REQ
Heat pump starts
in 320 seconds
Press "Info" once and you receive continuous information about what
the heat pump is doing and at which temperature it stops. You can
choose to remain in this display and always receive this information.
Press the middle button again to return to the first display.
47.5°
42.0°
45.0°
44.0°
Rego600
020301 12:00:00
Värme Info
Here are some of the displays you see if you choose scroll-
ing information with the Info button:
Heat pump is not operating.
The heat pump is producing hot water and you see the
current temperature and the temperature it stops at.
The heat pump and additional heat is in operation.
A need for heat has arisen and the heat pump is waiting for
the reset time to count down to zero.
13
K1
Fr
Meny
Press "Menu" once and
you come to the main
menu for settings or
temperature readings.