MiVoice Office 250 Engineering Guidelines
SYSTEM CALCULATOR OUTPUTS
When determining which configuration meets the customer's needs, there are many factors
that need to be considered. The System Calculator uses the input data to best produce a
recommended system configuration. Because there are other factors that may go into this
decision that are not supplied to the System Calculator (e.g., hunt group information and
paging), the System Calculator can only supply a recommendation based on supplied data.
The System Calculator also provides charts to graphically display the usages of various
resources in the system.
SYSTEM CALCULATOR RESULTS
The System Calculator produces three basic outputs: a system configuration recommendation,
the percentage of Phones-to-Devices chart and the percentage of IP Phones-to-Shared chart
per system type.
SYSTEM RECOMMENDATION
The system recommendation indicates which system configuration Mitel recommends and
which system or systems are not recommended.
In the following example, Mitel recommends the Mitel HX w/ PEC-1 system. The Mitel HX w/
PS-1 and Mitel HX w/ PEC-1 & PS-1 systems are also valid systems. The Mitel HX is not
recommended.
44