Group Pickup Enhancement; Other Enhancements; Mivoice Office 250 V6.1 Sp1 New Features; Engineering Guidelines - Mitel MiVoice Office 250 Manual Book

MiVoice Office 250 Engineering Guidelines

Group Pickup Enhancement

Assigning a Park/Pickup key to a Hunt Group destination is an enhancement to the existing
Group Pick-up feature, allowing Group Pick-up using a single key press, whilst also allowing
for a visual indication.

Other Enhancements

MiVoice Office 250 Release 6.2 supports Exchange 2016.

MIVOICE OFFICE 250 V6.1 SP1 NEW FEATURES

ENGINEERING GUIDELINES

The Engineering Guidelines (this document) is now a stand-alone document. It was previously
contained as an appendix in the MiVoice Office 250 Installation Manual.

MULTI-NODE VIDEO SUPPORT

MiVoice Office 250 Release 6.1 SP1 supports video calls between SIP clients connected to
different nodes. A SIP device connected to Node 1 can now make a video call to a SIP device
connected to Node 2.This is achieved by using the Peer-to-Peer (P2P) connection between
two SIP endpoints for the video calls for the endpoints connected to MiVoice Office 250.
The MiVoice Office 250 Release 6.1 SP1 supports the following features.
• Video calls between SIP clients connected to different nodes.
• Backward compatibility. A P2P video call from 6.1 SP1 node to 6.1/6.0/5.1 node is modified
to an audio call.
• SIP video devices as remote extensions via MBG.
• Video calls across the network like any other desktop device.
SIP PHONE GROUP – PASSWORD ALARM
MiVoice Office 250 Release 6.1 SP1 provides a new System Flag. This field is located in
System\Flags.
When enabled, Alarm 149 will be generated each time a SIP Phone registers with the MiVoice
Office 250, where the password used for the registration is either the same as the SIP Phone
extension number or it is left empty. The alarm is raised against the SIP phone group to which
the SIP Phone belongs. The SIP Phone will still able to register and operate, however the alarm
will notify the Administrator that security needs to be reviewed immediately for this SIP Phone
Group. This alarm will be cleared automatically by the system as soon as the SIP Phone
registers again using new credentials. Note that the Administrator first has to make the password
secure and cannot simply clear this alarm.
4