Mount The Event Recorder In The Bracket - Lytx ER-SF1 Installation Instructions Manual

ER-SF1 Event Recorder with J1939 Network Instructions for Self Installation

Mount the Event Recorder in the Bracket

1. Place the event recorder in the bracket.
2. Adjust the event recorder so it hangs vertically (plumb).
See Figure C.
3. Secure the event recorder in the bracket using the two
Torx screws.
© 2017 Lytx, Inc. – Confidential & Proprietary – For Velociti's Use Only Re Beta ER-SF1 Installations. Page 15 of 26