Table of Contents
Advertisement
ER-SF1 Event Recorder with J1939 Network Instructions for Self Installation
Suppliers Declaration of Conformance
We, Lytx, Inc., hereby declare that the
product listed below, to which this
Declaration of Conformity relates, is in
conformity with the Standards and other
Normative Documents listed below:
Manufacturer's Name & Address:
Lytx, Inc.
9785 Towne Centre Drive
San Diego, CA 92121 USA
Declares that the following product:
Product Name: Video Event Recorder
Product Model: ER-SF1
The product specified above carries the
marking, by complying with the essential
requirements and provisions. Conformity is
based upon the following standards:
DEVICE INSTALLATION OVERVIEW
What's Covered in the Installation Procedures
The following instructions are for the installation of the Lytx ER-SF1 event recorder (ER) with
integrated ECM connectivity for ECM data collection. These installation instructions cover the
mounting of the bracket and event recorder in the vehicle, electrical connections and cable
routing, and testing.
These instructions DO NOT cover the installation of any peripheral equipment.
Installation Warnings
THE DEVICE SHOULD BE INSTALLED BY QUALIFIED TECHNICIANS. Only a properly qualified
technician should install and maintain the ER-SF1. Any electrical work should be performed only
by an ASE (minimum T6 & L2), MECP or equivalent certified technician with an expertise in
installing and troubleshooting advanced vehicle onboard components including multiplexed
© 2017 Lytx, Inc. – Confidential & Proprietary – For Velociti's Use Only Re Beta ER-SF1 Installations. Page 8 of 26
Manufacturer's Contact:
Lytx, Inc.
9785 Towne Centre Drive
San Diego, CA 92121 USA
Phone Number: (858) 430-4000
Fax Number: (858) 430-4001
EMC & Radio:
CFR Title 47 FCC Part 15, Subpart B and C,
Class B
Industry Canada ICES-003 Issue 4 (2004),
Class B
Industry Canada RSS-Gen Issue 1 (2005)
Industry Canada RSS-210 Issue 6 (2005)
Hide quick links:
Advertisement
Table of Contents
