Before You Begin; Additional Support And Product Info; Materials - Lytx ER-SF1 Installation Instructions Manual

Event recorder j1939 network
Hide thumbs Also See for ER-SF1:
Table of Contents

Advertisement

ER-SF1 Event Recorder with J1939 Network Instructions for Self Installation
circuits. Lytx, Inc. disclaims all responsibility for any damages arising from improper installation
and maintenance of the ER-SF1.
THIS GUIDE IS NOT A SUBSTITUTE FOR A QUALIFIED TECHNICIAN.
THE DEVICE SHOULD NOT INTERFERE WITH THE VEHICLE'S COMPUTER SYSTEMS. The ER-SF1
device interfaces with the vehicle's computer systems to capture data for safety analysis. However,
it should not interfere with any of the vehicle's computer systems. If there is a malfunction of the
vehicle's computer systems after installation, contact Lytx U.S. Technical Support Center at
866.910.0403 or email
vehicle until the malfunction is resolved. Lytx, Inc. disclaims all responsibility for any damages
arising from improper installation and maintenance of the ER-SF1.

Before You Begin

1. Read and understand all instructions and procedures provided for the vehicle and
the ER-SF1. This guide must be read in conjunction with the vehicle manufacturer's service
manual, the Mounting Regulations, all instructions and procedures issued by Lytx, Inc., and
any applicable federal, state, provincial and local laws that prohibit mounting devices on
vehicle's windshield or other locations in a vehicle.
2. Read and observe all warnings, cautions, and safety notices in the instructions and
procedures. They provide information to avoid serious personal injury, damage to
components or both.
3. Follow the vehicle's maintenance, service, installation and diagnostic guidelines
provided by the manufacturer of the vehicle.
4. Check for laws that prohibit objects from being mounted on a vehicle's windshield or
other locations in a vehicle. You are responsible for complying with such laws, and Lytx, Inc.
does not accept responsibility for your failure to do so.
5. Use special tools and safety equipment to avoid serious personal injury and damage to
components.

Additional Support and Product Info

To obtain additional support and product information, contact the Lytx U.S. Technical Support
Center at 866.910.0403 or email support@lytx.com.

Materials

ER-SF1 unit
Windshield mount bracket
Two T-27 security torx screws
T-8 security torx screw
Alcohol wipe
© 2017 Lytx, Inc. – Confidential & Proprietary – For Velociti's Use Only Re Beta ER-SF1 Installations. Page 9 of 26
support@lytx.com
immediately. Lytx recommends that you do not drive the
Standard Power Cable
Vehicle Interconnect Cable with in-line
fuses
J1939 CAN Coupler

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents