Hard Drive - HP 15-cb000 Maintenance And Service Manual

Hard drive

NOTE: The hard drive spare part kit does not include the hard drive bracket or cable.
Description
Hard drives:
2-TB, 5400-rpm
1-TB, 5400-rpm
Hard drive bracket
Hard drive cable
Before removing the hard drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
To remove the hard drive:
1. Disconnect the hard drive connector cable from the system board (1).
2. Use the tab on the bracket at the front of the hard drive to lift the drive (2).
3. Remove the hard drive from the computer (3).
Bottom cover on page
Battery on page 37).
35).
Component replacement procedures
Spare part number
912487-855
766644-005
926877-001
926874-001
41