Rubber Feet - HP 15-cb000 Maintenance And Service Manual

Rubber feet

Description
Rubber feet for use in black and green models
Rubber feet for use in black and white models
Before removing the rubber feet, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
To remove the rubber feet:
▲ Peel the lower rubber feet (1) and upper rubber feet (2) from the bottom of the computer.
NOTE:
Reverse this procedure to install the rubber feet.
34 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
The lower feet and upper feet are different sizes.
Spare part number
926889-001
926890-001