2
Getting to know your computer
Right side
Component
(1)
(2)
(3)
(4)
Memory card reader
Power light
Drive light
USB Type-C port with HP Sleep and Charge
Description
Reads optional memory cards that enable you to store, manage,
share, or access information.
To insert a card:
1.
Hold the card label-side up, with connectors facing the
computer.
2.
Insert the card into the memory card reader, and then
press in on the card until it is firmly seated.
To remove a card:
▲
Press in on the card, and then remove it from the memory
card reader.
On: The computer is on.
●
●
Blinking: The computer is in the Sleep state, a power-
saving state. The computer shuts off power to the display
and other unneeded components.
Off: The computer is off or in Hibernation. Hibernation is a
●
power-saving state that uses the least amount of power.
●
Blinking white: The hard drive is being accessed.
●
Amber: HP 3D DriveGuard has temporarily parked the hard
drive.
Connects a USB device that has a Type-C connector, provides
high-speed data transfer, and even when the computer is off,
charges products such as a cell phone, camera, activity tracker,
or smartwatch (select devices only).
– or –
Connects to various USB, video, HDMI, and LAN devices.
NOTE:
Cables and/or adapters (purchased separately) may be
required.
Right side
5