Steering Wheel Remote Controls - Sea Ray 250 Select EX Owner's Manual

S
ECTION
The stereo is protected by the stereo fuse on the
bilge component board. The power source and
fuse protection for the stereo memory is on the
bilge component board. Power to stereo memory
is maintained even if the battery switch is off.
REFER TO OWNER'S MANUAL PACKET FOR
INSTRUCTIONS AND WARRANTY INFORMATION.
6. S W
TEERING HEEL
C
ONTROLS
The remote controls on the steering wheel allow
the operator to control the stereo system and the
SmartCraft™ System View display without reaching
for the dash.
S W R
TEERING HEEL EMOTE
(F . 7.7.1)
IG
SOURCE BUTTONS GROUP
(STEREO SYSTEM)
The SOURCE buttons group controls the stereo
system.
SOURCE button - When pressed and released,
powers on the stereo system when it is off.
When pressed and released while the system
is on cycles between the system sources from
radio to satellite to CD player to auxiliary input
and back to radio. When pressed and held for
one (1) second turns the power off.
UP and DOWN arrow buttons - Control the
volume.
LEFT arrow button -
• In radio or satellite mode - When pressed
and released cycles through the preset
250 Select EX
7 • O
PTIONS
R
EMOTE
C
ONTROLS
SELECT BUTTONS GROUP
(SMARTCRAFT SYSTEM VIEW)
& A
CCESSORIES
channels. When pressed and held for two
(2) seconds in radio mode cycles between
AM, FM1, FM2 and FM3 bands; in satellite
mode cycles between SAT1, SAT2 and SAT3
bands.
• In CD player mode - When pressed and
released skips to the next CD track. When
pressed and held for two (2) seconds
changes to the next CD in the changer.
RIGHT arrow button -
• In radio or satellite mode - When pressed and
released cycles through the preset channels.
When pressed and held has no effect.
• In CD player mode - When pressed and
released skips to the previous CD track.
When pressed and held has no effect.
The SELECT buttons group controls the
SmartCraft™ System View display or System Tach
and Speedometer.
For Boats with System View:
SELECT button - When pressed and released
performs the same function as the SELECT
button on the System View. When pressed and
held for two (2) seconds performs the same
function as the HOME button on the System
View.
Direction buttons - When pressed and released
perform the same functions as the direction
buttons on the System View. When pressed
and held have no special function.
For Boats with System Tach and Speedometer:
SELECT button - When pressed and released
performs the same function as the MODE button
on the System Tach.
Left and Right direction buttons - When pressed
and released perform the same functions as the
TROLL- and TROLL+ buttons on the System
TACH.
Up direction button - When pressed and released
selects which system gauge display to control
(Port Tach, Stbd Tach, Speedo). The selected
7.7