Bilge Blower - Sea Ray 250 Select EX Owner's Manual

S
ECTION
3. Remove any debris that may have accumulated
in the nozzle section or strainer base.
4. Check hose and connection on hull side for
debris and proper connections.
E. B B
ILGE LOWER
To prevent buildup of gasoline fumes to the explosive
level in the engine compartment, the bilge blower
must be run for at least four (4) minutes before
starting the engine and kept running at all times
when the engine is running to ensure that there
will be adequate ventilation when you are moving
slowly.
! WARNING
Do not allow obstructions to interfere with bilge blower
or ventilation intake operation. Engine performance
may be adversely affected.
B L
LOWER OCATION AND
(F . 4.3.1)
IG
BLOWER
INTAKE
VENT
250 Select EX
4 • B
ILGE
H R
OSE OUTING
EXHAUST
VENT
& U
NDERWATER
B B
ILGE LOWER
(F . 4.3.2)
IG
The bilge blower is protected by a fuse on the
accessory fuse block located at the helm (See Fig.
6.3.1).
!
EXPLOSION/FIRE HAZARD – Run blower at least
four (4) minutes before starting engine or gen er a tor.
Check bilge and engine com part ment for fumes.
G
EAR
WARNING
4.3