Stopping The Engine; Steering System - Sea Ray 250 Select EX Owner's Manual

8. S E
TOPPING THE
1. Move the shift/throttle
lever to NEUTRAL and
let engine idle for about 5
minutes to allow engine to
cool down.
2. Turn OFF ignition key.
9. S S
TEERING YSTEM
! WARN ING
Failure of the steering system will cause loss of
control of your boat. Any change in steering such as
looseness, tightness, binding, etc., must be checked
immediately by your Sea Ray dealer.
The steering system is an enclosed push-pull cable
that is hydraulically assisted (power steering) at the
stern drive end (Fig. 3.6.3 & 3.6.4). THE CABLE
AND ITS CONNECTIONS TO THE STEERING
WHEEL AND TO THE OUT DRIVE MUST BE
INSPECTED AT LEAST TWICE A YEAR BY
YOUR SEA RAY DEALER. See Section 8 of this
manual for inspection, service and maintenance
recommendations.
The power steering pump (Fig. 3.6.4) fl uid level
MUST be checked every time prior to using the
boat. Refer to the steering system information in
your Owner's Packet.
3.6
S 3 • U
ECTION
NGINE
(F . 3.6.1)
IG
(F . 3.6.2)
IG
Y B
SING OUR
S , T & S
HIFT HROTTLE
(F . 3.6.3)
IG
ENGINE
SHIFT
CABLE
ENGINE
THROTTLE
CABLE
P S S
OWER TEERING
(F . 3.6.4)
IG
POWER STEERING
CYLINDER
STEERING
CABLE
CHECK & ADD
FLUID HERE
POWER
STEERING
PUMP
STEERING
WHEEL
OAT
C R
TEERING ABLE OUTING
YSTEM
FLUID
RETURN LINE
PRESSURE
RETURN
HELM
STEERING RACK
250 Select EX
STEERING
CABLE
FLUID
LINE
FLUID
LINE