System Shut-Down
1.
Flip "retract" switch from "run" position.
2.
Trigger gun to send pumps into full downstroke.
3.
Turn off hydraulic power pack.
4.
Turn off primary heaters.
On/Off
Operation
5.
Turn main power switch off.
6.
Refer to gun manual for proper Gun maintenance.
7.
Reduce Hydraulic Pressure Knob setting to ZERO.
8.
Visually inspect entire system for leaks.
9.
Turn OFF System.
CAUTION
Do not bleed fluid pressure from the system.
Storing The Hose
Coil the hose with a minimum diameter of 4', To avoid kink-
ing and subsequent damage to the internal wiring of the
hose assembly.
48