Electrical Connections; Hydraulic Pack - Glas Craft MH II User Manual

Electrical Connections

NOTE
Electrical connections must be checked on a periodic
basis.
1.
200/208 volt single phase
L1 L2 GROUND
If the rotation is not correct, switch any two lead
wires.
2.
200/240 volt three phase
L1 L2 L3 GROUND
If the rotation is not correct, switch any two lead
wires.
3.
380 volt three phase
L1 L2 L3 N GROUND
If the rotation is not correct, switch any two lead
transformer
wires.
4.
The transformer can now be set for proper
hose length.
COM 15V 30V
CONNECTIONS
COM
(DO NOT
MOVE)
D
SIZE: (ref.): 4" X 4-1/4"
COLOR:
21192-00
BORDER, LINES, AND TEXT - BLACK
H1 PRIMARY H2
45V 60V 75V
TO HOSE
HOSE LENGTH
15V 50 FT
30V 100 FT
45V 150 FT
60V 200 FT
60V 250 FT
75V 300 FT
Installation
Hydraulic Power Pack
The hydraulic pack tank is empty when shipped
from GlasCraft. The tank
before operation.
Tank Capacity: 20 GAL. / 75.5 Liter
Recommended Hydraulic Fluid: ISO grade 32, 46, or 68.
Fluids containing anti-wear additives
are recommended for optimum service life.
STENCIL 32 PT.
ARIAL 12 PT. BOLD
ARIAL 14 PT. BOLD
ARIAL 11 PT. BOLD
21129-00
42
MUST
be filled
Fill Cap
Fill Gauge