Toshiba E-Studio 202s Operator's Manual For Basic Function page 35

Using the SCAN key to begin scanning
• Scanning is not possible during a copy job.
• If the SCAN (
stored.
• When scanning an original that has been placed in the ADF, only one
original can be placed unless you are using Desktop Document Manager.
1
Press the SCAN (
The unit enters scan mode.
2
Place the original you wish to scan on the document
glass/ADF.
For the procedure for placing the original, see "ORIGINAL PLACEMENT"
(p.39).
3
Press the right copy quantity
key to display the number of
the application that you wish to
use for scanning.
The application numbers are initially
as follows.
Application
number
SC1
SC2
SC3
SC4
SC5
SC6
To check the settings, see "Scan Button Destination Setting Dialog Box"
(p.30) and then open the settings window of the Button Manager.
) key is pressed during a print job, the scan job will be
) key.
Application launched
Desktop Document Manager
Email
FAX
OCR
Microsoft Word
Filing
3
33