Installing The Software - Toshiba E-Studio 202s Operator's Manual For Basic Function

INSTALLING THE SOFTWARE

• The screen images in this manual are mainly for Windows XP. With
• In the following explanations it is assumed that the mouse is
• If an error message appears, follow the instructions on the screen to
1
The USB cable must not be connected to the machine. Make
sure that the cable is not connected before proceeding.
If the cable is connected, a Plug and Play window will appear. If this
happens, click the "Cancel" button to close the window and disconnect the
cable.
The cable will be connected in step 13.
2
Insert the CD-ROM into your computer's CD-ROM drive.
3
Click the "start" button, click "My Computer" (
double-click the CD-ROM icon (
• In Windows Vista, click the "Start" button, click "Computer", and then
double-click the CD-ROM icon.
• In Windows 98/Me/2000, double-click "My Computer", and then
double-click the CD-ROM icon.
4
Double-click the "setup" icon (
In Windows Vista, if a message screen appears asking you for confirmation,
click "Allow".
5
The "SOFTWARE LICENSE" window will appear. Make sure
that you understand the contents of the software license, and
then click the "Yes" button.
You can show the "SOFTWARE LICENSE" in a different language by
selecting the desired language from the language menu. To install the
software in the selected language, continue the installation with that
language selected.
6
Read the "Readme First" in the "Welcome" window and then
click the "Next" button.
18
other versions of Windows, some screen images may be different from
those in this manual.
configured for right hand operation.
solve the problem. After the problem is solved, the installation
procedure will continue. Depending on the problem, you may have to
click the "Cancel" button to exit the installer. In this case, reinstall the
software from the beginning after solving the problem.
), and then
).
).