Toshiba E-Studio 202s Operator's Manual For Basic Function page 12

About the scan head
The scan head lamp remains on constantly when the unit is in the ready condition
(when the start (
The unit adjusts the scan head lamp periodically to maintain copying quality. At this
time, the scan head moves automatically. This is normal and does not indicate unit
trouble.
Initial settings of operation panel
When the unit power is on, the operation panel will revert to the initial settings when
the time set with the "Auto clear time" setting (p.46) elapses after a job is finished, or
when the clear key is pressed twice.
The initial settings of the operation panel are shown below.
When copying has begun in this state, the settings in the following table are used.
Copy quantity
Exposure adjustment
Zoom
Tray
Power off methods
If not used for a certain period of time, the unit will automatically enter auto power
shut-off mode (p.44) in order to minimize power consumption. In cases where the
machine will not be used for a long time, turn off the power switch and remove the
power cord from the outlet.
10
) indicator is illuminated).
"0" is displayed in the display.
1 copy
AUTO
100%
Paper tray 1