Toshiba E-Studio 202s Operator's Manual For Basic Function page 67

Bit depth
Sensor
Scanning speed
Memory
Power supply
Power consumption
Width
Overall
dimensions
Depth
Weight
8
(Approximately) *
Width
Unit
Depth
dimensions
Height
Operating conditions
Emulation
Interface port
Noise level
Emission
concentration
(measured according
to RAL-UZ122 : Edition
Jun. 2006)
*1 When standard 8-1/2" x 11" (A4) paper is used under the operating conditions.
*2 Feed paper lengthwise only.
*3 Leading and trailing edges.
*4 Along the other edges in totals.
*5 When making multiple duplex copies, the copy speed will vary based on the environment
conditions.
*6 Print speed during printing of the second sheet and following sheets when using 8-1/2" x 11"
(A4) plain paper in the tray 1 and performing continuous one-sided printing of the same
page.
*7 The first-copy time is measured after the power save indicator turns off following power on,
using the document glass with the polygon rotating in the copy ready state and "Selection of
copy start state" set to ON in the user programs (8-1/2" x 11" (A4), paper fed from paper tray).
The first-copy time may vary depending on machine operating conditions and ambient
conditions such as temperature.
The time from power on until the first copy is output varies depending on the installation site
and the state of the machine in use.
*8 Not including toner cartridge.
1 bit or 8 bit/pixel
Color CCD
Max. 2.88ms/line
8 MB
Local voltage ±10% (For this machine's power supply requirement,
see the name plate located on the back of the machine.)
Max. 1.0kW
31-5/8" (802mm)
17-5/8" (445mm)
36.5 lbs. (16.6kg)
20-1/2" (518mm)
17-5/8" (445mm)
11-3/4" (298mm)
Temperature: 50°F to 86°F (10°C to 30°C)
Humidity: 20% to 85%
GDI
USB interface (USB 2.0 Full Speed)
Sound power level
LwA
Copying mode: 6.2B
Standby mode: 3.2B
Sound pressure level
LpA
Copying mode: 48dB(A)
Standby mode: 16dB(A)
Sound pressure level
LpA
Copying mode: 52dB(A)
Standby mode: 16dB(A)
Noise emission measurement in accordance with ISO7779.
Ozone: 1.5 mg/h or less
Dust: 4.0 mg/h or less
Styrene: 1.0 mg/h or less
Benzene: 0.05mg/h or less
TVOC(Printing): 10mg/h or less
TVOC(Pre-Operating): 1mg/h or less
(reference) (Bystander positions)
(reference) (Operator position)
9
65