C
HAPTER
Replacing the Chassis
This section provides instructions for replacing the Omneon
MediaDeck chassis.
CAUTION: Observe all conventional ESD precautions when
handling Omneon MediaDeck components.
CAUTION:
down completely before replacing the chassis. Refer to
Powering Down the Omneon MediaDeck
on powering down.
Powering Down the Omneon
MediaDeck
Before removing power to your Omneon MediaDeck, Omneon
recommends that you first stop the file system. Once you reconnect
power to your MediaDeck, you must then start the file system again.
Omneon MediaDeck™
7
Make sure the Omneon MediaDeck is powered
for instructions
49