Harmonic Spectrum MediaPort 7000 Component Replacement Manual
  1. Manuals
  2. Brands
  3. Harmonic Manuals
  4. Server
  5. Spectrum MediaPort 7000
  6. Component replacement manual
Harmonic Spectrum MediaPort 7000 Component Replacement Manual

Harmonic Spectrum MediaPort 7000 Component Replacement Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Spectrum
™
MediaPort 7000
Component Replacement Guide
Revision B

Advertisement

Table of Contents
loading

Related Manuals for Harmonic Spectrum MediaPort 7000

Summary of Contents for Harmonic Spectrum MediaPort 7000

  • Page 1 Spectrum ™ MediaPort 7000 Component Replacement Guide Revision B...
  • Page 2 Harmonic assumes no responsibility or liability arising from the use of the products described herein, except as expressly agreed to in writing by Harmonic. The use and purchase of this product do not convey a license under any patent rights, copyrights, trademark rights, or any intellectual property rights of Harmonic.
  • Page 3 System. As used herein, the term "Software" means the Harmonic owned software and/or firmware used in or with the Products and embedded into, provided with or loaded onto the Products in object code format, but does not include, and this Agreement does not address, any third-party or free or open source software separately licensed to you ("Third Party Software").
  • Page 4 U.S. Government as end users (a) only as Commercial Items and (b) with only those rights as are granted to all other end users pursuant to the terms and conditions herein. Harmonic, 4300 North First Street, San Jose, CA 95134, U.S.A.
  • Page 5 Copyright © 2015–2016 Harmonic Inc. All rights reserved. Harmonic, the Harmonic logo, Omneon, the Omneon logo, [all other Harmonic products mentioned] are trademarks, registered trademarks or service marks of Harmonic Inc. in the United States and other countries. Dolby, Dolby Digital, Dolby Digital Plus and Dolby E are registered trademarks of Dolby Laboratories.

  • Page 6: Table Of Contents

    Removing a MediaPort from SystemManager..................16 Replacing the chassis........................16 Changing an I/O module name....................17 Activating players..........................18 Verifying functionality........................18 Appendix A: Harmonic Technical Assistance Center contact information ........ 19 Harmonic corporate contact information.................... 20 Appendix B: Safety and regulatory compliance information ............. 21 Important safety instructions......................
  • Page 7 Spectrum Product end-of-life disassembly instructions..................33 Safety rules (English)........................34 Règles de sécurité..........................34 EU manufacturer’s Declaration of Conformity..................34 Electromagnetic compatibility notices – Class A..................34 Product regulatory compliance markings....................37 Product environmental compliance.....................38 EU RoHS........................... 39 EU REACH..........................39 China RoHS..........................40 Other RoHS and REACH type regulations..................41 Waste Electrical and Electronic Equipment (WEEE)...............

  • Page 8: Chapter 1: Introduction

    This guide provides information to help you replace components in your Spectrum device or system. Make sure that you read all safety warnings and instructions, and that you have received a replacement component from Harmonic before you begin any of the procedures in this guide.

  • Page 9: Chapter 2: Component Replacement

    • Power supply replacement • ChannelPort or MediaPort module replacement Bezel replacement Replacement bezels are available from Harmonic. DANGER: Observe all conventional ESD precautions when handling Spectrum devices and components. Removing the bezel The bezel may be removed during operation.

  • Page 10: Installing The Bezel

    3. Pull the bezel straight away from the chassis. Installing the bezel Align the bezel in front of the chassis so that the Harmonic logo appears on the top left corner. 1. Unpack the new bezel. 2. Attach the bezel power/data connector.

  • Page 11: Power Supply Replacement

    Unpack the replacement component and inspect for damage. If it is damaged, call Technical Support for assistance and do not continue with this procedure. To take full advantage of the redundant supplies, Harmonic recommends that you use separate, isolated power sources for each AC input.
  • Page 12 MediaPort 7000 component replacement 2. Press the release lever to the right and pull the handle to remove the power supply. 3. Using the handle, slide the power supply into the empty chassis slot. The release lever will click to indicate that the unit is locked in place.

  • Page 13: Channelport Or Mediaport Module Replacement

    Spectrum 4. Connect the AC power cable. ChannelPort or MediaPort module replacement Follow these procedures when replacing a ChannelPort or MediaPort module in the MediaPort 7000. NOTE: The procedures in this section apply to SystemManager version 6.3. If you are running a different version of SystemManager, some steps may vary. Refer to the SystemManager Release Notes for instructions on upgrading.

  • Page 14: Detaching An I/O Module From Players

    MediaPort 7000 component replacement 3. Check the box for each Player that you wish to deactivate. NOTE: If replacing a Spectrum server or I/O module, be sure to select all active Players associated with the server or module. 4. Click Deactivate Selected. Detaching an I/O module from players Detach a device from players when you wish to replace a MediaPort, ChannelPort, or SDI I/O module.

  • Page 15: Removing A Module From The Chassis

    Spectrum 2. Click the icon for the component you wish to wink. The Properties page appears. 3. From the General Information section of the page, view the Wink State. If currently Off, click Wink On. • • If currently On, click Wink Off. Removing a module from the chassis Remove the module from the chassis using a cross-head screwdriver.

  • Page 16: Installing The Replacement Module

    MIP-7XXX-NNNNN, CPT-8XXX-NNNNN, or MIP-9XXX-NNNNN) next to the attached tracks. TIP: For help with modifying settings on either the Edit Player page or the Attach Devices page, refer to “Creating a player” in the Harmonic SystemManager User Guide. 7. Click Done to return to the Player List page.

  • Page 17: Verifying Functionality

    To activate the player as disabled, select Activate as disabled. c. To activate and enable the player, select Activate and Enable. Verifying functionality Harmonic recommends that you verify functionality of the replacement equipment in your Spectrum system before using it on air.

  • Page 18: Chapter 3: Chassis Replacement

    Chapter 3 MediaPort 7000 chassis replacement This section provides instructions for replacing a MediaPort 7000 chassis. Complete the procedures in this section in order. CAUTION: Observe all conventional ESD precautions when handling MediaPort components. NOTE: The procedures in this section apply to SystemManager version 6.3. If you are running a different version, some steps may vary.

  • Page 19: Removing A Mediaport From Systemmanager

    Spectrum Removing a MediaPort from SystemManager Remove a device that is no longer part of your Spectrum system. 1. From the Diagnostics tab, click the Remove Device icon in the left-hand column. The Remove Device page appears. 2. If the device you are remoivng is not responsive, find the device in the Not Responding Devices section, select it, and then click Remove Not Responding Devices.

  • Page 20: Changing An I/O Module Name

    After replacing a MediaPort, the new device appears in SystemManager with the default name. NOTE: For information about proper naming conventions, please refer to "About Naming Files and System Elements" in the Harmonic SystemManager User Guide. 1. From the System Diagram, click the icon for the MediaPort that you wish to rename.

  • Page 21: Activating Players

    To activate the player as disabled, select Activate as disabled. c. To activate and enable the player, select Activate and Enable. Verifying functionality Harmonic recommends that you verify functionality of the replacement equipment in your Spectrum system before using it on air.

  • Page 22: Appendix A: Harmonic Technical Assistance Center Contact Information

    Appendix A Harmonic Technical Assistance Center contact information A list of phone numbers, e-mail addresses, and important links for the Harmonic Technical Assistance Center (TAC). Table A-1: Technical Assistance Center phone numbers and email addresses Region Telephone Technical Email Support Americas 888.673.4896...

  • Page 23: Harmonic Corporate Contact Information

    Spectrum Harmonic corporate contact information Phone numbers and addresses for the corporate office. Harmonic corporate address 4300 North First Street San Jose, CA 95134 U.S.A. Harmonic corporate telephone numbers Tel. 1.800.788.1330 (from the U.S. and Canada) Tel. +1.408.542.2500 (outside the U.S. and Canada)

  • Page 24: Appendix B: Safety And Regulatory Compliance Information

    Legal disclaimer: Information in this document is provided in connection with Harmonic products. Unless otherwise agreed in writing Harmonic products are not designed nor intended for any application in which the failure of the product could cause personal injury or death.

  • Page 25: Safety Symbols & Translated Safety, Warning & Caution Instructions (English)

    To avoid personal injury or property damage, before you begin installing or replacing the product, read, observe, and adhere to all the following safety instructions and information. Harmonic products and/or product packaging may be marked with the safety symbols used throughout this document, when it is necessary to alert operators, users, and service providers to pertinent safety instructions in the manuals.
  • Page 26 Safety and regulatory compliance information Mark Notes Chassis warning • Before connecting or disconnecting ground or power wires to the chassis, ensure that power is removed from the DC circuit. • To prevent personal injury or damage to the chassis, lift the unit only by using handles that are an integral part of the chassis, or by holding the chassis underneath its lower edge.

  • Page 27: Symboles De Sécurité Et Traduits De Sécurité, D'avertissement Et Attention Instructions (Français)

    • Dispose of used batteries according to the manufacturer's instructions • There are no user-serviceable batteries inside Harmonic products. Refer to Harmonic qualified personnel only to service the replaceable batteries Caution Symboles de sécurité et traduits de sécurité, d'avertissement et Attention Instructions (français)
  • Page 28 Safety and regulatory compliance information de sécurité utilisés dans le présent document, lorsque cela est nécessaire pour alerter les opérateurs, les utilisateurs et les fournisseurs de services de consignes de sécurité pertinentes dans les manuels. Mark Notes Installation ou remplacement de l'unité de produit avertissement •...
  • Page 29 Spectrum Mark Notes Choc électrique avertissement • Il est possible que cette unité soit munie de plusieurs cordons d'alimentation. Pour éviter les risques d'électrocution, débrancher les deux cordons d'alimentation avant de réparer l'unité. • Avant de travailler sur un châssis ou à proximité d'une alimentation électrique, débrancher le cordon d'alimentation des unités en courant Avertissement alternatif.

  • Page 30: Sicherheit Symbole Und Übersetzt Sicherheit, Achtung & Vorsicht Anleitung (Deutsch)

    • Mettre au rebut les batteries usagees conformement aux instructions du fabricant. • Les batteries des produits Harmonic ne peuvent pas être réparées ni entretenues par l'utilisateur. Ne confier l'entretien des batteries remplaçables Attention qu'à du personnel compétent de Harmonic.
  • Page 31 Spectrum Informationen. Harmonic Produkte und / oder Produktverpackungen können mit den Sicherheitssymbole in diesem Dokument verwendet werden, markiert, wenn es notwendig ist für die Betreiber, Anwender und Dienstleister, um relevante Sicherheitsanweisungen in den Handbüchern zu alarmieren. Mark Notes Installation oder den Austausch des Produkts Einheit Warnung •...
  • Page 32 Safety and regulatory compliance information Mark Notes Chassis Warnung • Gleichstrom-Unterbrechung Bevor Sie Erdungs- oder Stromkabel an das Chassis anschließen oder von ihm abtrennen, ist sicherzustellen, daß der Gleichstrom-Stromkreis unterbrochen ist. • Um Verletzungen und Beschädigung des Chassis zu vermeiden, sollten Sie das Chassis nicht an den Henkeln auf den Elementen (wie z.B.
  • Page 33 Spectrum Mark Notes Elektroschock-Warnung • Diese Einheit hat möglicherweise mehr als ein Netzkabel. Zur Verringerung der Stromschlaggefahr trennen Sie beide Netzgerätekabel ab, bevor Sie die Einheit warten. • Vor der Arbeit an einem Chassis für Arbeiten in der Nähe Stromversorgung, ziehen Sie das Netzkabel mit Netzeinheiten.
  • Page 34 Bei Einsetzen einer falschen Batterie besteht Explosionsgefahr • Entsorgen Sie die benutzten Batterien nach den Anweisungen des Herstellers. • Es gibt keine zu wartenden Akkus im Harmonic Produkte. Siehe Harmonic qualifiziertes Personal, um die austauschbare Batterien Service Vorsich MediaPort Component Replacement Guide...

  • Page 35: Site Preparation Instructions

    Do not move or ship equipment unless it is correctly packed in its original wrapping and shipping containers. ◦ Only allow Harmonic trained personnel to undertake equipment service and maintenance. Do not permit unqualified personnel to operate the unit. ◦...

  • Page 36: Product End-Of-Life Disassembly Instructions

    Product end-of-life disassembly instructions For disassembly instructions, please call the technical support in order to remove components requiring selective treatment, as defined by the EU WEEE Directive (2012/19/EU). See Harmonic Technical Assistance Center contact information on page 19. 1. Disassemble equipment at a dedicated area only, gather the needed tools for disassembly.

  • Page 37: Safety Rules (English)

    Le personnel du recycleur doit avoir de l'expérience des outils de démontage de l'appareil. Les produits Harmonic ne doivent pas être démontés par du personnel non qualifié. Une mauvaise connaissance des outils peut causer des dommages et des blessures.
  • Page 38 FCC radio frequency emission limits. Modifications to this equipment not expressly approved by Harmonic may void the authority granted to the user by the FCC to operate this equipment and you may be required to correct any interference to radio or television communications at your own expense.
  • Page 39 Spectrum English translation of the notice above: This is a Class A Information Product, when used in residential environment, it may cause radio frequency interference, under such circumstances, the user may be requested to take appropriate counter measures. 6. Class A warning (Korea) English translation of the notice above: This is a Class A device and is registered for EMC requirements for industrial use.

  • Page 40: Product Regulatory Compliance Markings

    Safety and regulatory compliance information Product regulatory compliance markings Table B-1: Regulatory compliance markings Country/ Testing Certification Regulatory Product marks region standard/ type mark name specification USA/ Safety NRTL EN 60950- Canada (National 1:2006 Recognized +A11:2009 Test +A1:2010 Laboratory) +A12:2011; CAN/CSA C22.2 No.

  • Page 41: Product Environmental Compliance

    1): 2010 Compulsory Conforming to IS Registration 13252 (Part 1):2010, R- XXXXXXXX" Product environmental compliance Harmonic manufactures high quality and innovative IT and telecommunications equipment, video delivery infrastructure solutions and services for its customers worldwide. Harmonic is committed to providing our...

  • Page 42: Eu Rohs

    European Union’s regulation on chemicals and their safe use which came into force in June, 2007. Harmonic supports the basic aim of REACH in improving the protection of human health and environment through the better and earlier identification of intrinsic properties of chemical substances. Harmonic products are considered “articles”...

  • Page 43: China Rohs

    For more information, please visit China RoHS regulation page at official US export website. http://www.export.gov/china/doingbizinchina/ China RoHS Disclosure report Below table shows the presence of hazardous substances, or elements in Harmonic products, if the part is present. 该表显示哈雷公司产品中可能含有的有毒有害物质元配件的信息，除了来源于元配件供应商的物料成分资 料， 亦来自其它相关的机构与资料。哈雷产品不一定使用这些元配件。...

  • Page 44: Other Rohs And Reach Type Regulations

    SJ/T11363 2006 standard. Other RoHS and REACH type regulations Harmonic will comply with RoHS and REACH type regulations evolving in other countries, if they become relevant to our products or in markets where we sell our products.

  • Page 45: Weee Take-Back Request Program

    Harmonic’s WEEE Take-Back program for product disposal. Harmonic will pay for the cost of shipping and will provide a Certificate of Recycling or a Certificate of Destruction upon request. For more information on collection, reuse and recycling or to initiate the WEEE take-back process, please complete the form at http://www.harmonicinc.com/webform/weee-...

  • Page 46: Compliance With Additional Country Specific Environmental, Safety And Emc Standards

    Compliance with additional country specific environmental, safety and EMC standards: In addition to above listed standards and compliance regulations, Harmonic products may also be compliant with other country specific environmental, safety and EMC requirements. Please contact Harmonic Compliance Team at regulatory.compliance@harmonicinc.com...
  • Page 47 Copyright © 2016 Harmonic Inc. All rights reserved.

This manual is also suitable for:

Spectrum x

Table of Contents