Harmonic Omneon MediaDeck Component Replacement Manual page 39

To attach the new I/O module to existing players:
1. Open the Player List for the Omneon MediaDeck, and then click
the Edit link for any player that will use the new I/O module.
Tip: To open the Player List, click the Player Configuration icon in the
left-hand column, and then click the icon for your Omneon MediaDeck.
2. For each track, click the Attach Devices button (within each track
section) to display the Attach Devices page as shown in
Figure 14 Attach Devices Page
3. In the Attach column, click the check box for the device (Omneon
MediaDeck Module) that you wish to connect, and then click Done.
The Edit Player page appears. The ID of the new I/O module will
appear (in the following format: MDM-5001_XXXXX) next to the
attached tracks.
NOTE: For help with modifying settings on either the Edit Player page or
the Attach Devices page, refer to "Creating a Player" in the
SystemManager User's Guide.
4. Click Done to return to the Player List page.
5. Repeat steps 1-4 for each player that uses the new I/O module.
Omneon, Now Part of Harmonic
Replacing an I/O Module
Figure 14.
29