Restricting Machine Functions According To User; Enabling The User Restriction Settings - Ricoh SP C260DNw User Manual

Restricting Machine Functions According to
User
You can configure settings to require a user code when someone tries to use certain machine functions.
To enable this setting, you must first configure the machine settings via Web Image Monitor.
• This function is available for SP C262DNw only.
• To print jobs that require authentication you can use only the PCL printer driver. Printing such jobs
from the PostScript 3 printer driver is not possible.
• For details about using Web Image Monitor, see page 96 "Using Web Image Monitor".

Enabling the User Restriction Settings

This section explains how to configure settings to permit only authorized users to use certain machine
functions.
Using Web Image Monitor, enable user restriction for all or some of the functions listed below, and then
register users who can use those functions.
• PictBridge printing
• Printing (both color and black-and-white)
• Color printing
You can specify functions available to each user upon authentication. Up to 30 users can be registered.
1. Start the Web browser, and access the machine by entering its IP address.
2. Click [Restrict Available Functions].
3. Enter the administrator password if required.
4. Click [Apply].

Restricting Machine Functions According to User

107