Replacing A Headlight Bulb - Yamaha Super Tenere XTZ12H 2016 Owner's Manual

Periodic maintenance and adjustment

Replacing a headlight bulb

This model is equipped with halogen
bulb headlights. If a headlight bulb
burns out, replace it as follows.
NOTICE
Do not touch the glass part of the
headlight bulb to keep it free from
oil, otherwise the transparency of
the glass, the luminosity of the bulb,
and the bulb life will be adversely af-
fected. Thoroughly clean off any dirt
and fingerprints on the headlight
bulb using a cloth moistened with al-
7 cohol or thinner.
1. Do not touch the glass part of the bulb.
1. Remove the headlight bulb cover
by turning it counterclockwise.
EAU70820
1
ECA10661
1. Headlight bulb cover
2. Disconnect the headlight coupler.
1. Headlight coupler
3. Unhook the headlight bulb holder,
and then remove the burnt-out
bulb.
7-33
1. Headlight bulb
2. Headlight bulb holder
4. Place a new headlight bulb into
position, and then secure it with
1
the bulb holder.
5. Connect the headlight coupler.
6. Install the headlight bulb cover by
turning it clockwise.
7. Have a Yamaha dealer adjust the
headlight beam if necessary.
1
2