Yamaha Super Tenere XTZ12H 2016 Owner's Manual page 35

and return to the normal display, push
and hold the menu switch "MENU"
again for 2 seconds.
Display Description
Check and reset the "OIL"
oil change interval (dis-
tance traveled since last
Maintenance
oil change), and the
"FREE-1" and "FREE-2"
maintenance intervals.
Check and reset the
"TIME–2" and "TIME–3"
timers. These timers show
the total elapsed time that
the key has been in the
"ON" position. When the
key is turned to "OFF",
Time Trip
these timers stop counting
but are not reset. The
maximum time that can be
shown is 99:59.
When the time trips ex-
ceed 99:59, they will reset
and continue counting.
Switch the fuel consump-
tion units between
Unit
"L/100km" and "km/L".
Arrange the items shown
in the 3 information display
Display
pages.
Adjust the brightness of
the multi-function meter
Brightness
unit.
Set the clock. The clock
displays time in 12-hour
Clock
format.
Instrument and control functions
Reset all items, except the
All Reset
odometer and the clock.
Resetting the maintenance intervals
1. Use the select switch to highlight
"Maintenance".
MENU
Maintenance
Time Trip
Unit
Display
Brightness
Clock
All Reset
2. Push the menu switch "MENU",
and then push the "RESET" but-
ton to select the item to reset.
Maintenance
OIL km
20
FREE-1 km
10
FREE-2 km
10
4-16
3. While the selected item is flashing,
push and hold the "RESET" but-
ton for 2 seconds.
4. Push the menu switch "MENU" to
return to the setting mode main
screen.
Checking and resetting "TIME–2" and
"TIME–3"
1. Use the select switch to highlight
"Time Trip".
MENU
Maintenance
Time Trip
Unit
Display
Brightness
Clock
All Reset
2. Push the menu switch "MENU" to
display "TIME–2" and "TIME–3".
To reset a time trip, push the "RE-
SET" button to select the item to
reset.
4