Yamaha Super Tenere XTZ12H 2016 Owner's Manual page 32

Instrument and control functions
 average fuel consumption
 instantaneous fuel consumption
Odometer:
ODO
4
The odometer shows the total distance
traveled by the vehicle.
Tripmeters:
TRIP-1
TRIP-2
"TRIP-1" and "TRIP-2" show the dis-
tance traveled since they last reset.
TIP
 The odometer will lock at 999999.
 The tripmeters will reset and con-
tinue counting after 9999.9 is
reached.
The fuel reserve tripmeter shows the
distance traveled on the fuel reserve.
km
When approximately 3.9 L (1.03 US
20
gal, 0.86 Imp.gal) of fuel remains in the
fuel tank, the last segment of the fuel
meter starts flashing. In addition, the
information display will automatically
change to the fuel reserve tripmeter
"TRIP-F" and start counting the dis-
tance traveled from that point.
km
5.0
km
7.0
In this case, push the select switch to
rotate among the information display
pages in the following order;
GEAR
4
TRIP-F km
3.4
4-13
TRIP-F → Display–1 → Display–2 →
Display–3 → TRIP-F
To reset a tripmeter, push the "RESET"
button briefly so that the tripmeter
flashes, and then push and hold the
"RESET" button for 2 seconds.
TIP
The fuel reserve tripmeter can be reset
manually, or after refueling and travel-
ing 5 km (3 mi), it will reset automatical-
ly and disappear from the display.
Estimated traveling range:
RANGE
11
This shows the approximate distance
that can be traveled with the remaining
fuel under current riding conditions.
Elapsed time:
TIME TRIP
0:06
km