Replacing An Auxiliary Light Bulb - Yamaha Super Tenere XTZ12H 2016 Owner's Manual

Replacing an auxiliary light
bulb
This model is equipped with two auxil-
iary lights. If an auxiliary light bulb
burns out, replace it as follows.
1. Remove the windshield by remov-
ing the screws.
2
1. Windshield
2. Screw
2. Remove the cover by pulling it
outward.
EAU58971
1
1. Cover
2
3. Remove the panel by removing
the screws and the quick fastener
screw.
2
1
1. Panel
2. Screw
3. Quick fastener screw
4. Remove the headlight unit cover
by removing the bolts.
Periodic maintenance and adjustment
1
3
2
7-34
1
2
1. Headlight unit cover
2. Bolt
5. Remove the headlight unit bolts,
then pull the headlight unit slightly
out, making sure that it remains
supported. NOTICE: Be careful
not to pull the headlight leads.
[ECA16811]
1
2
1. Headlight unit
2. Headlight unit bolt
2
7
2