SoundCraft Ui24R User Manual page 15

Ui24R User Manual
GETTING STARTED > HARDWARE
Wi-Fi Indicator
Shows Wi-Fi is operating normally
The indicator also shows Wi-Fi boot status during power up. It stops its timed flash sequence when booted
and available for connections. Then flashes with data activity.
If the WiFi LED keeps flashing it can mean the firmware is not loading into the DSP. Make sure latest firm-
ware is loaded into the unit and that the DC power connector is properly screwed on.
ETHERNET 2
Future Expansion Port
Wi-Fi Antenna
Necessary for wireless network connection - Hotspot or WiFi
Make sure the Antenna(s) are firmly screwed into their sockets and normally orientated vertically. For more
information on wireless network settings, see section 10.1. The Ui24RR ships with 2 WiFi antenna's for bet-
ter wifi performance. The second antenna is on the right side of the Ui24R.
2.2: HARDWARE I/O & CONTROL
2.2: Hardware I/O And Control