2: Wi-Fi Settings - SoundCraft Ui24R User Manual

Ui24R User Manual
SETTINGS > NETWORK CONFIG > WI-FI
The Ui can connect to an existing Wi-Fi network / Hotspot, and you can access the control software via
the unit's IP number (shown in Settings > Network). Select the Wi-Fi Configuration menu in Network
Config to edit the Wi-Fi settings.
Use the Save/Update button to save Wi-Fi settings.
IMPORTANT: You must recycle the Ui power (turn the unit off and on) for settings to take effect.
Wi-Fi
Enabled / Disabled
Enable or disable the Wi-Fi connection.
SSID (Service Set Identifier)
Text Entry
This is the name of the network you wish to connect to.
Password
Text Entry
This is the password for the network you wish to connect to.
Master Password Protection
Address
DHCP / Manual
You can choose dynamic IP allocation, in which case the Ui will automatically allocate an IP, Netmask, and Gateway.
If you choose Manual IP allocation, you will need to complete these fields yourself. Please refer to your network
administrator for manual IP allocation.
10.1.2: WI-FI

10.1.2: Wi-FI SETTINGS