1: Updates & Requirements - SoundCraft Ui24R User Manual

Ui24R User Manual
SOFTWARE UPDATES & REQUIREMENTS
The browser-based software control for the Ui Series actually runs from a virtual web server in the
main Ui unit itself and is compatible with any modern browser software running on your control
device. For Android users, you must use Android browser 4.4 or later, or another modern browser like
Chrome to use the Ui web app.
Up to 10 control devices can be used simultaneously.(Depending on available bandwidth)
Software Updates
Regular software updates are posted on the Soundcraft website and are available from the product page.
In the Tablet software you can check your current Ui software version by navigating to the SETTINGS page
and selecting the ABOUT tab. In the Phone software you can check your current Ui software version by
navigating to the SETTINGS page and selecting the HELP tab.
To update the Ui software:
1. Download the Ui update file from the website and leave in .zip format.
2. Copy the .zip file to a USB media device suitable for connection to a Ui mixer's USB port. Note: The file
can reside in any directory. Any USB port on the mixer is also acceptable.
3. Ensure your client device is connected to the Ui mixer GUI
4. Connect the USB media
5. The GUI display will display that the USB device has been mounted. After the stick has been read (may-
be 10 more seconds) the update will be recognised.
6. The GUI will ask if you would like to update. Choose OK.
7. The mixer will perform the update
8. The GUI will present a message stating whether the update has been successful or not.
9. You must power-cycle the unit and reconnect a client device.
10. You can browse to the about page to see the new Firmware version information.
USB AUDIO DRIVER
The Ui24R requires the use of the Soundcraft SI Impact Audio Driver for multichannel USB playback and
recording.
It can be downloaded via:
http://www.soundcraft.com/en/softwares/soundcraft-multichannel-usb-audio-driver-v3-20 or above
IMPORTANT!
Note that if you have any type of zip file (other than the update file) in any directory on the
USB key already, the software update will not work. Note Mac OS by default unzips down-
loaded files which will render the firmware update incompatible.
3.0.1: UPDATES & REQUIREMENTS
3.0.1: SOFTWARE UPDATES & REQUIREMENTS