SoundCraft Ui24R User Manual page 72

Ui24R User Manual
CHANNEL EDIT > PARAMETRIC EQ
HPF/LPF BALL
Draggable graphic 'ball' for High Pass and Low Pass Filter controls
Drag this graphic element to control. Left/Right adjusts Cut-Off frequency. Double-click/tap to reset. Right
Hand side of the screen displays selectable slope.
HPF/LPF SLOPE CONTROL
High pass and low pass filtering is available to Ui24R users and is accessible through the Parametric EQ.
High Pass means only allowing the higher frequencies to play through, Low Pass means only allowing lower
frequencies to play through. By using these two filters on the Parametric EQ the user can tailor the sound to
suit their specific PA setup.The Slope control alters the degree of filtering.
DE-ESSER THRESHOLD
Fader control of De-Esser Threshold
De-Esser threshold is the level at which the De-Esser starts to attenuate the 'ess' band. To access the De-
Esser fader controls in phone software, tap the DE-ESSER SETUP button.
DE-ESSER RATIO
Fader control of De-Esser Ratio
De-Esser Ratio is the amount by which the 'ess' band is attenuated when the audio level crosses the
Threshold. To access the De-Esser fader controls in phone software, tap the DE-ESSER SETUP button.
DE-ESSER FREQUENCY
Fader control of De-Esser Frequency
Determines the centre frequency of the De-Esser dynamic filter - the frequency on which the de-essing
process is focussed. To access the De-Esser fader controls in phone software, tap the DE-ESSER SETUP
button.
5.2: PARAMETRIC EQ
5.2: PARAMETRIC EQ