1: Hotspot Settings - SoundCraft Ui24R User Manual

Ui24R User Manual
SETTINGS > NETWORK CONFIG > HOTSPOT
The Ui has it's own hotspot, so it can create it's own network so other devices can connect to it and ac-
cess the software in it's built-in webserver. Select the Hotspot Configuration menu in Network Config to
edit the Hotspot settings.
Use the Save/Update button to save Hotspot settings.
IMPORTANT: You cannot have both Hotspot and Client WIFI enabled at the same time.
Hotspot
Enabled / Disabled
Enable or disable the UI's own Hotspot. Please note, if the Hotspot is disabled you will need to connect to the Ui via
either an existing Wi-Fi network, or a wired LAN connection (Ethernet).
SSID (Service Set Identifier)
Text Entry
This is the name of the Ui Hotspot. The default is 'Soundcraft Ui'
Wireless Regulatory Domain
Region Selection
Select the correct region - your current location. This will help select the correct channel selection.
Channel
Channel Selection
A number of channels are available within the Wi-Fi spectrum, depending on the Regulatory Domain - 13 for Europe
(ETSI), and 11 for North America (FCC), for example. Third-party software is available to help select Wi-Fi channels.
Security
None / WPA2
Choose either no security, or WPA2 (Wi-Fi Protected Access II) protection. IN the latter case, you will have to choose
a password.
10.1.1: HOTSPOT

10.1.1: HOTSPOT SETTINGS