Advertisement
EN 68
5.
DVDR730/0x
Example
Nucleus Name
Nucleus Number
Description
User Input
Example
Nucleus Name
Nucleus Number
Description
User Input
Example
Nucleus Name
Nucleus Number
Description
User Input
Example
Diagnostic Software
DS:> 1229
122900: 6D7920626F61726400020300010101020101000020080000
Test OK @
DS_SYS_AudioLoopThroughStart
1230
Description: The audio input is routed from the an input to all outputs. Input is set with
the routing nucleus 1113. All outputs are enabled.
None.
DS:> 1230
123000:
Test OK @
DS_SYS_AudioLoopThroughStop
1231
Stop routing the audio input to all the outputs
-
DS:> 1231
123100:
Test OK @
DS_SYS_SettingsHwIdSet
1232
Double check whether stored HW-string equals actual HW as far as we can
automatically detect this. An automatic and a manual mode is supported.
-
'manual' or 'MANUAL' to enter manual mode
-
default is automatic mode where the nucleus stops upon and reports the first
encountered error
DS:> 1233
123300:
Test OK @
DS:> 1233 manual
123300:
Test OK @
DS:> 1233
123301:Hardware ID mismatch: in HW-Diversity string:99, actual in FLASH:0
Error @
DS:> 1233 manual
Hardware ID mismatch! in HW-Diversity string:99, actual in FLASH:0
Enter the correct HW ID of the digital board.
> 0
The HW-diversity string has been modified by you. Settings:
Board name:
DIAG
Hardware ID:
0
Codec IC:
PNX7100_MF3
Video Input Processor IC:
Progressive Scan Deinterlacer IC: None
Progressive Scan Denc IC:
I-Link physical layer circuit IC: PDI1394P25
I-Link link layer circuit IC:
PDI1394P40
Audio clock:
Clock scheme 1
Bit engine connector:
available
IDE connector 1:
available
IDE connector 2:
not available
PCI connector:
not available
RAM size
32MByte
ROM size (NOR FLASH bank 1)
ROM size (NOR FLASH bank 2)
ROM size (NAND FLASH)
Is it OK to program this inthe new HW-diversity string? ([y]es/[n]o):y
Diversity HW-string programmed successfully.
123300:
Test OK @
DS:>
SAA7118
ADV7196
8MByte
Not available
Not available
Advertisement
