Advertisement
EN 64
5.
DVDR730/0x
Example
Nucleus Name
Nucleus Number
Description
User Input
Example
Nucleus Name
Nucleus Number
Description
User Input
Example
Nucleus Name
Nucleus Number
Description
User Input
Example
Nucleus Name
Nucleus Number
Description
User Input
Example
Nucleus Name
Nucleus Number
Description
User Input
Example
Nucleus Name
Nucleus Number
Description
User Input
Diagnostic Software
DS:> 1204
120400: Software Diagnostics Version = 0001
Test OK @
DS_SYS_EepromUpload
1205
Upload the contents of the NVRAM on the analogue board or the digital board to the
service PC, by using the X-modem protocol
Choose one of the following parameters for the nucleus:1.
of the NVRAM of the digital board2.
analogue boardChoose in the terminal on the control PC -> transfer -> receive file.
Select X-modem protocol. Then click receive in the dialogue and fill in the file name
in which you want to store the data.
120503
Something went wrong while transferring the data.
120504
User cancelled the upload.
DS:> 1205
1120500:
Test OK @
DS_SYS_EepromDownload
1206
Download a file with the contents of the NVRAM for the analogue board or the digital
board from the service PC to the recorder, by using the X-modem protocol
Choose one of the following parameters for the nucleus:1.
contents of the NVRAM of the digital board2.
NVRAM of the analogue boardChoose in the terminal of the control PC -> transfer -
> send file. Select X-modem protocol. Then choose a file with the Browse button in
the dialogue and click on send.
DS:> 1206
1120600:
Test OK @
DS_SYS_DvIdNumberSet
1207
Set the IEEE 1394 unique IDThe unique ID to be set.
None
DS:> 1207
1234567890 120700:
Test OK @
DS_SYS_DvIdNumberGet
1208
Get the IEEE1394 ID
None
DS:> 1208
120800: The DvIdNumber is: 0x0C22384E5A
Test OK @
DS_SYS_IicWrite
1209
Perform an IIC write action on the digital board
The user input the number of bytes to write followed by these bytes:
<BusID><Slave address to write to><number of bytes to write><d1><d2><..><dx>
Where the bus ID is either 0 (normally used) or 1
DS:> 1209 0 0xa0 1 0x6
120900: 1 Bytes written
Test OK @
DS_SYS_IicRead
1210
Perform an IIC read action on the digital board
The user inputs the number of bytes to read and the address to read them from:
<BusID><Slave address to read from><Number of bytes to read>Where the bus ID
is either 0 (normally used) or 1
Upload the contents
Upload the contents of the NVRAM of the
Download the
Download the contents of the
Advertisement
