Toyota VENZA NAVI User Manual page 151

TONE SIGNAL
If a continuous tone signal is registered
in a phonebook, this screen appears.
(If not registered, "Send" and "Clear"
are not displayed.) This can be operat-
ed while driving.
1
Confirm the number displayed on the
screen and touch "Send". The number
before marked sign will be sent.
 When "Clear" is touched, this function is
finished and the normal tone screen
appears.
To hang up the phone: Touch
or press the switch on the steering
wheel.
1. PHONE OPERATION
INFORMATION
●
The continuous tone signal is the
marked sign (p or w) and the number
that follows the phone number. (e.g.
056133w0123p#1)
●
When the "p" pause tone is used, after
waiting 2 seconds the tone data up until
the next pause tone will be automatically
sent. When the "w" pause tone is used,
the tone data up until the next pause
tone will be automatically sent after user
operation.
●
This operation can be done when it is
desirable to operate an answering
machine or use a telephone service in a
bank for example. The phone number
and the code number in the phonebook
can be registered.
BY VOICE RECOGNITION
"Send Tones" can be operated by giv-
ing a command during a call.
 The operating procedure is similar to
other voice recognition operations. (For
the operation of voice recognition, see
"VOICE COMMAND SYSTEM" on page
270.)
VENZA_Navi_OM73020U_(U)
4
151
13.05.13 14:12