Toyota VENZA NAVI User Manual page 186

2. SETUP
CHANGING THE Bluetooth
SETTINGS
®
The Bluetooth settings
changed according to the following
procedures.
■
CHANGING "Bluetooth* Power"
The "Bluetooth* Power" display shows
the following state.
When "Bluetooth* Power" is "On":
Vehicles with a smart key system
®
The Bluetooth device is automatically
connected when the "ENGINE START
STOP" switch is in ACCESSORY or IGNI-
TION ON mode.
Vehicles without a smart key system
®
The Bluetooth device is automatically
connected when the engine switch is
turned to the "ACC" or "ON" position.
When "Bluetooth* Power" is "Off":
®
The Bluetooth device is disconnected,
and the system will not connect to it next
time.
 The "Bluetooth* Power" auto connection
state can be set on or off.
• "On": The auto connection is turned on.
• "Off": The auto connection is turned off.
 The auto connection state cannot be
changed from "On" to "Off" while driving,
but it can be changed from "Off" to "On".
186
1
®
Touch "Bluetooth* Power".
can be
2
Touch "On" or "Off".
3
Touch "Save".
 In the event the state of "Bluetooth*
Power" is changed from "Off" to "On",
Bluetooth
*: Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
®
connection will begin.
VENZA_Navi_OM73020U_(U)
13.05.13 14:12