Toyota VENZA NAVI User Manual page 119

4
Touch either or
direction of the current position mark.
5
Touch "OK".
 The map will be displayed.
■
TIRE CHANGE CALIBRATION
The tire change calibration function will
be used when replacing the tires. This
function will adjust
caused by the circumference differ-
ence between the old and new tires.
1
To perform the distance calibration
procedure, touch "Tire Change".
 The message appears and the quick dis-
tance calibration is automatically started.
A few seconds later, a map will be dis-
played.
to adjust the
INFORMATION
●
If this procedure is not performed when
the tires are replaced, the current posi-
tion mark may be incorrectly displayed.
When "Pop-up information" is turned
on, pop-up information will be dis-
played.
1
Press the "SETUP" button.
2
Touch "Navigation" on the "Setup"
screen.
3
Touch "Detailed Navi. Settings" on
the "Navigation Settings" screen.
miscalculation
4
Touch "Pop-up Information".
5
Touch "On" or "Off".
6
Touch "Save".
 When "Pop-up Information" is turned
off, the following messages will not be dis-
played.
POP-UP INFORMATION
VENZA_Navi_OM73020U_(U)
13.05.13
4. SETUP
3
119
14:12