Phone (Hands-Free System For Cellular Phone) - Toyota VENZA NAVI User Manual

1. PHONE OPERATION

2. PHONE (HANDS-FREE SYSTEM FOR CELLULAR PHONE)

The hands-free system enables calls
to be made and received without hav-
ing to take your hands off the steering
wheel.
This system supports Bluetooth
®
Bluetooth is a wireless data system
that enables cellular phones to be used
without being connected by a cable or
placed in a cradle.
The operating procedure of the phone
is explained here.
 For registering and setting of the phone,
see "PHONE SETTINGS" on page 156
®
and "Bluetooth SETTINGS" on page
178.
CAUTION
●
While driving, do not use a cellular
phone or connect the Bluetooth
●
An antenna for the Bluetooth
tion is built in the instrument panel. Peo-
ple with implanted pacemakers or
cardiac defibrillators should maintain a
reasonable distance between them-
selves and the Bluetooth
The radio waves may affect the opera-
tion of such devices.
●
Before using cellular phones, users of
any electrical medical device other than
implanted pacemakers and implanted
cardiac defibrillators should consult the
manufacturer of the device for informa-
tion about its operation under the influ-
ence of radio waves. Radio waves could
have unexpected effects on the opera-
tion of such medical devices.
NOTICE
●
Do not leave your cellular phone in the
vehicle. The temperature inside may rise
to a level that could damage the phone.
132
INFORMATION
●
If your cellular phone does not support
Bluetooth
●
In the following conditions, the system
may not function:
®
.
• The cellular phone is turned off.
• The current position is outside the
communication area.
• The cellular phone is not connected.
• The cellular phone has a low battery.
●
When using Bluetooth
hands-free at the same time, the follow-
ing problems may occur:
• The Bluetooth
cut.
• Noise may be heard on the Bluetooth
audio playback.
●
This system supports the following ser-
vices:
• Bluetooth
Ver.1.1 or higher
(Recommended: Ver.2.1 + EDR or
®
phone. higher)
®
connec- • Profiles
HFP (Hands Free Profile)
Ver.1.0 or higher
(Recommended: Ver.1.5 or higher)
OPP (Object Push Profile)
®
antennas. Ver.1.1 or higher
PBAP (Phone Book Access Profile)
Ver.1.0 or higher
MAP (Message Access Profile)
Ver.1.0 or higher
SPP (Serial Port Profile)
Ver.1.1 or higher*
*: This profile is necessary when using
Entune. (See "ENTUNE SERVICE" on
page 306.)
®
, this system cannot function.
®
audio and
®
connection may be
®
Specification
VENZA_Navi_OM73020U_(U)
13.05.13
®
14:12