Setting Route; Detour Setting - Toyota VENZA NAVI User Manual

2. ROUTE GUIDANCE

5. SETTING ROUTE

DETOUR SETTING

While the route guidance is operating,
the route can be changed to detour
around a section of the route where a
delay is caused by road repairs, or an
accident, etc.
1
Touch "Route".
2
Touch "Detour".
3
Touch a screen button to select the de-
sired detour distance.
88
"1 mile (km)", "3 miles (km)" or "5 miles
(km)": Touch one of these screen buttons
to start the detour process. After detouring,
the system returns to the original guidance
route.
"Whole Route": Touch to make the sys-
tem calculate an entire new route to the
destination.
"Around Traffic": Touch to make the sys-
tem search for the route based on the traf-
fic congestion information received from
®
XM NavTraffic . For details, see "XM
®
NavTraffic " on page 301.
INFORMATION
●
This picture shows an example of how
the system would guide around a delay
caused by a traffic jam.
This position indicates the location of a
traffic jam caused by road repairs, an
accident, etc.
This route indicates the detour sug-
gested by the system.
●
When the vehicle is on a freeway, the
detour distance selections are 5, 15 and
25 miles (or 5, 15 and 25 km if units are
in km).
●
The system may not be able to calculate
a detour route depending on the
selected distance and surrounding road
conditions.
VENZA_Navi_OM73020U_(U)
13.05.13 14:12