Toyota VENZA NAVI User Manual page 273

VOICE COMMAND EXAMPLE:
PERFORMING A DESTINATION
SEARCH BY ADDRESS
1
Press the talk switch.
2
Say "Enter an address".
 If the destination's state/province has not
been set or is not contained in the voice
command recognition list, the screen to
input a state/province will be displayed.
 Some areas cannot be recognized by the
voice recognition system.
 For information regarding the state/
province setting to perform a destination
search by address, see "SELECTING
THE SEARCH AREA" on page 58.
3
Say "<city name>".
 Say the desired city name that belongs to
the set state in the place of the "<>".
 Say "Change State" to change the set
voice recognition state.
1. VOICE COMMAND SYSTEM OPERATION
4
Say "<street name>".
 Say the desired full street name, or main
body of the street name that belongs to
the set state in the place of the "<>".
 The
voice command
designed to recognize the main body of
the official street name.
For example, if the official street name is
"East Main Street", the voice command
recognition will recognize "Main".
5
Say "<house number>".
 Say the desired number, cardinal/intercar-
dinal direction etc. in the place of the "<>".
For example: Say "West 555".
 Inputting the house number can be
skipped.
6
Say "Start guidance" or "Show
map". Alternatively,
Guidance" or "Show Map".
 After this, follow the voice guidance and
search for a destination route by voice
command operation.
VENZA_Navi_OM73020U_(U)
recognition is
touch "Start
6
273
13.05.13 14:12