Gemtek Systems P-360 User Manual page 50

Appendix
Factory Default for P360 Access Point
The following settings and parameters are the factory default for "Hot-Spot in a Box" Access Point
model P360.
Default Device General Configuration Settings:
Operating Mode
Operation Mode
General Configuration Settings
Host Name
DNS Server Address
System Identification
Serial Number
Address
Coordinates
Customer Name
Network Configuration Settings
IP Address assigned by ISP
IP Subnet Mask
ISP Default Gateway
DHCP Client
Wireless Configuration Settings
Access Point SSID
Domain
Channel
Encryption Algorithm
Antenna Gain in dBi
Total Output Power (EIRP) in dBm
Default Advanced Settings:
Firewall Settings
Firewall Function
ACL
Default ACL Policy for wireless network
Default ACL Policy for Ethernet
Gemtek Systems
AP (Access Point)
P-360
0.0.0.0
identification
MAC address of the device (provide on the device box)
address
coordinates
Customer_name
192.168.2.2
255.255.255.0
(none)
disable
P360
World
11
No Encryption
00 (can vary, depending on wireless LAN card)
20 (can vary, depending on wireless LAN card)
Not enabled
Accept
Accept
Page 51