Figure 188 – Add New ACL Rule
•
Specify the MAC address of the device you want to add to the ACL. The format is a list of colon
separated hexadecimal numbers (for example: 00:00:78:0A:CD:FF).
•
Select the Target of the rule, whether the specified network device should be allowed or denied
as an Access Points client.
Firewall Settings
The firewall settings allow to specify IP packet filters to enhance the data security. The firewall takes
effect between LAN and WAN and is supposed to avoid forbidden intrusion to your local network. The
firewall rules are divided into Input and Output (in AP router operating mode) or Prerouting (in AP
mode) rules to assign special procedures to a certain data transmission direction.
Gemtek Systems
Page 27