Table of Contents
Advertisement
Figure 256 – Add Port Forwarding Rule
In this example, all requests to the P-360 on port 25 will be redirected to the IP address 192.168.2.28
on port 1445.
Port forwarding is a kind of reverse function to IP masquerading. Hence this
function can take effect only when NAT is enabled! Please refer to your firewall
settings to check if the port forwarding settings are suitable.
Administrator's Settings
You can change the Administrator's password using this Administrator Settings menu.
Default Administrator password: Pass.
Just enter old administrator password, type new one (from 4 up to 16 characters) of your choice and
retype it. Click the Save Settings button to apply new administrators password to the system.
Figure 267 – Administrator's Settings
Gemtek Systems
Page 33
Advertisement
Table of Contents
