Table of Contents
Advertisement
Isolation Settings
Figure 201 -- Layer 2 Isolation
Routing Settings
Routing Settings is available when the access point is in AP-Router operation
mode.
Opening the page you will find a list of all present routes, each consisting of the related interface, the
destination IP address, the gateway and the subnet mask. The default values in this list are generated
from your current IP settings in the Network Configuration Settings menu.
The routing list shows, how the router will handle data packets received on an interface at destination
to a specific IP address. In this example, all data received on the Ethernet interface with an
destination IP address in the 192.168.2.0 network will be forwarded to the default gateway. All other
data packets received on the Ethernet interface will be forwarded to the gateway 192.168.2.1.
If there is more than one route specified for one destination, the metric value shows the priority, how
the router will try the routes. The metric value indexes the number of gateways between sender and
destination.
Gemtek Systems
Page 30
Advertisement
Table of Contents
