Figure 403 – Upgrade Firmware
After selecting a valid firmware version file, click the Upgrade button to proceed. The upgrade
process begins.
Do not switch off and do not disconnect P-360 from power supply during firmware
update process because the device could be damaged. Best use Ethernet
connection (not wireless) for firmware update process.
After a successful upgrade process, the device firmware is upgraded, the Main Menu page is
displayed, and the previous device configuration set is maintained.
Reboot
Use the Reboot function to stop all working device functions and restart the device.
Figure 414 -- Reboot Device
Reboot – click the button to restart device.
Gemtek Systems
Page 45