Table of Contents
Advertisement
DNS Server Address is the IP address of a domain name server. This IP address, provided by your
ISP, will be assigned to all PCs requesting address information through DHCP from the P-360.
Available in AP-Router mode only!
If you are not sure about the IP address of the DNS server currently responsible for
your local network, please get your IP configuration with "ipconfig" (Win 2000, Win
NT and Win XP) or "winipcfg" (Win 9x and Win Me) from the command prompt.
System Identification is a more specific device name for better identification by service staff.
Serial Number is the MAC address of the device and cannot be modified!
Address is the street and postal address of the location where the device is deployed.
The Coordinates specifies the longitude and latitude or other coordinates of the device location.
Customer Name is the customer's name.
All of the parameters above on the general configuration setting page are required!
Network Configuration Settings
On the network configuration settings page you can modify the IP settings for the P-360 and the
default gateway.
Figure 13 – Network Configuration Settings
Gemtek Systems
Page 22
Advertisement
Table of Contents
